The Cookware Valley


How to Restore Hard Anodized Cookware

How to Restore Hard Anodized Cookware? Guide 2023

Hard anodized is a coating on aluminum that makes it resistant to scratches and corrosion. Anodization makes the cookware quite simple but does require extra care. 

You might be worried about how to restore your hard anodized cookware if the pan has some scratches or has been in the dishwasher less than a few times.

The good news is you do not need to panic as you can restore the hard-anodized aluminum surface to its original condition. Simply use a dry, green Scotch Brite heavy duty scrub sponge and rub it in the same direction as the grain of the dry pan.

Even though anodized cooking cookware are long-lasting and distribute heat evenly, they lose their superiority if you don’t properly restore hard anodized cookware.

A little grease in the cookware doesn’t mean your appliance is ruined, but you must take it off and clean it. It would help if you kept the anodizing pot clean, dry, and out of direct sunlight.

How to Restore the Hard Anodized Cookware Safely?

Over time, tough-to-remove grease stains can accumulate to ruin a surface’s glossy finish of hard anodized cookware.

The hard anodized cookware’s delicate body makes it easy to clean after use and it also retains heat better than traditional aluminum. Using harsh chemicals and methods to restore its original appearance will result in a scratched surface.

If you’re using a company-made cleaning solution, you have to clean it according to their cleaning method to restore its hard anodized finish.

What Steps are Involved to Restore Hard Anodized Cookware?

Following these instructions, you can restore your hard anodized cookware in shape.

1. Make Use of Specialized Cleansing Equipment

If you want to restore your anodized cookware, then you need to start by using a particular cleaning solution like Stardrops. However, it would be best to be careful when choosing one because some products can damage your pans.

2. Using Of Dishwashing Detergent

When you’re using an old piece of kitchen utensil, you might notice that it gets dull after a few uses. There are several ways that you can restore your hard anodized cookware as brighter as new, including: 

  • You can use soap and water, dishwashing detergent by Dawn, or baking soda. Whatever method you choose, you need to take care of your cookware correctly. Otherwise, you could end up ruining the surface of the cookware.
  • To keep your cooking equipment looking great, you should always wash it thoroughly before you put it away. It is especially true if you’ve been using it for a while.

3. Use Cold Water To Wash The Cookware.

  • Use cold water to clean the pots and pans. It will stop cooking and allow you to clean the pots and pans.
  • Soap won’t help unless there’s food or grease in the pot, so you don’t need it. Use water to clean food residue.
  • After Rinsing your pot thoroughly with cold water, let it dry completely. Once you’ve finished, you can store your restored anodized cookware in a cool, dark place.

4. By Using Sandpaper

  • Using sandpaper and a small cleaning solution, remove any lingering stubborn stains from your anodized cookware. Wash your hard anodized cookware to reveal a body that is clean and free of stains.
  • Polish the entire surface of your pot. Flaws will be less noticeable after using this technique. You should repeat this step until you notice a difference in the appearance of the pot.

5. By Warm Water and Soap

  • Fill your pot or pan with water, boil it, and let it cool for 5 minutes before pouring it on your skillet. Boiling water neutralizes anodized aluminum, making it shinier and simpler to scrape off rust stains.
  • After pouring the boiling water, use a sponge or towel soaked in dish detergent to remove any cooking grease. 

6. Baking Soda and Vinegar

  • Baking soda is a safe cleanser for hard-anodized cookware. Baking soda and vinegar in boiling water can clean and restore hard-anodized surfaces.
  • To 3 liters of boiling water, combine four teaspoons baking soda, two teaspoons detergent powder, two teaspoons liquid dish wash, a teaspoon white vinegar, and the juice of one lime. Allow the cleaning solution to boil for 10 to 15 minutes.
  • Insert your grease-stained hard anodized cookware into the cleaning solution until it cools to room temperature.
  • Remove the grease-stained cookware from the cleaning solution. Scrub the grease-stained surface with steel wool and a tiny cleaning solution.

Tip to Restore the Outside Parts of Hard Anodized Cookware:

  • If there is a stubborn burn or stain on the outer part of your hard anodized cookware, you can apply a scouring cleanser to scour them. For instance, scouring powder by Bar Keepers Friend or baking soda combined with a bit of water forms an excellent paste.
  • Use a dishrag or soft-bristled cleaning brush to apply the mixture to the grime, and then wash the pots and pans with hot water to remove the cleaner.

Tip to Restore the Inside Parts of Hard Anodized Cookware:

It is essential to restore the inside parts of the Hard Anodized cooking utensil to their original state. If you have been using your cookware for a long time, cleaning them may be necessary before restoring them.

  • First, you need to remove any food residue from the surface of the cookware by soaking the pieces in warm water. Then, rinse the utensils with soap and hot water. After that, wash them in the dishwasher.
  • Heat the grease-stained surface of your hard anodized cookware on a stovetop. For at least 10 minutes, heat the anodized cookware on high.
  • Scrape the grease spots from your hard anodized cookware with a spatula.
  • Pour liquid dishwashing on the grease-stained surface of your anodized cookware. 
  • Scrub the grease-stained surface using a soft-bristle cleaning brush, gentle scrubbing pad, or dishcloth to scrub off the rust outside the pan. You can also use a mild scouring powder, such as Weiman, and hot water to remove the stain.
  • Finally, apply a coat of clear polish to the entire piece. Let it dry completely, and then polish the surface to give the item a new look.

You may be wondering why you need to do this. Well, an anodized finish comprises microscopic pores that trap grease. If you leave these pores alone, they will eventually fill in. However, the pore size will become more significant if you try to polish them off. As a result, the oil and fat will leak out.

What to Consider While Restoring Hard anodized cookware?

  • Spreading a thin layer of cooking oil over the whole inside surface of your hard anodized cookware by Rachael before you begin cooking reduces the likelihood of food sticking to the pan.
  • Cool off hot cooking tools in cold water, or they’ll become distorted. Instead, wait until they are completely cooled down before washing.
  • Your anodized cookware is probably not going to fare well in a dishwasher. That is why avoid using the dishwasher for your hard anodized cookware.
  • Once you’ve cleaned your pan, you’ll have to ensure it gets adequately dried before it goes back into service. If you don’t dry the surface of your pan thoroughly, then you might end up with rust spots.
  • It would help if you don’t use liquid household cleansers or acidic cleaners like oven cleaner or bleach to restore hard anodized cookware.
  • Use a cleaning solution; if you don’t have one, you’ll need to use white vinegar, lemon, baking soda, detergent powder, steel wool, Scotch Brite, and sandpaper.
  • Fill a pot with boiling water that is larger than your anodized cookware.
  • Remove any lingering stubborn stains from your anodized cookware with sandpaper and a little cleaning solution. To reveal a clean, stain-free body, wash your hard anodized cookware.

Can you restore hard anodized cookware?

If the hard-anodized aluminum surface of the cookware has only been in the dishwasher once or twice, it may be possible to restore it to its former condition. Utilize a dry, green Scotch Brite® Heavy Duty Scrub Sponge and rub it against the grain of the dry pan.

Does the anodized coating deteriorate?

The pigment fills all the vacant pores up to the surface, where it is sealed off permanently. Because the colors are embedded deep inside the substrate, they cannot be scratched off the surface and can only be removed by removing the substrate via grinding.

How do you thoroughly clean anodized hard cookware before restoring?

To remove burnt-on grease from hard-anodized or infused-anodized aluminum cookware, immerse the pan in hot water and a liquid dishwashing detergent like Dawn to release the fat and food particles. Rinse and hand wash using a Bar Keeper’s Friend® cleaner and a Scotch Brite Heavy Duty Scrub Sponge.

How do you restore a burnt hard anodized pan?

To remove burnt-on grease from hard-anodized aluminum or infused-anodized aluminum cookware, immerse it in hot water with a liquid dishwashing detergent like Dawn® to loosen the fat and food particles. Use a Scotch Brite® Heavy Duty Scrub Sponge and Bar Keeper’s Friend® cleanser to rinse and hand wash.

What is the best way to clean a scorched or burnt bottom pan?

Cover the burned area with 2-3 teaspoons of baking soda mixed with a little water to form a paste. Scrub all around with crumpled aluminum foil until all food pieces and discolored areas are clean. Warm soapy water should be used to rinse the pan.


The nonstick quality of the hard anodized cookware prevents light surface stains from food. However, with time, grease stains can build up and destroy the stainless steel exterior.

Hard anodized cookware is incredibly fragile despite its corrosion-resistant shell. Therefore, adopting simple techniques to restore its appearance will leave the surface covered with scratches. If you want your hard anodized cookware to look new again, you’ll need to utilize a cleaning solution or implement our cleaning technique.

I hope this article was helpful in better understanding how to restore your hard anodized cookware.

We appreciate your feedback in the comment section.

Leave a Comment